1·The dispersion effects of several typical kinds of surfactants on nickel electroplating bath were studied.
以镍电镀液为分散介质，研究了几种典型类型表面活性剂的分散效果。
2·The zinc electroplated strip is characterized in that it is plated with the zinc electroplating bath composition.
镀锌片的表征条件为：使用渡锌液混合物来电镀。
3·The result showed that the mode of sample entering electroplating bath with electrification and without impact current could made the adhesion harder.
研究结果表明选择带电入池，无冲击电流方式时，可增强银镀层的结合力。
4·JP-2000 192279, Cyanide-free electroplating bath for silver and silver alloy coating, using fatty sulphurous compounds that are stable for a relatively long time.
本文介绍了国内无氰镀银研究情况，部分翻译了日本专利特开2000-192279，介绍银及其合金的无氰电镀液组分及工艺，镀液比较稳定。
5·A very stable emulsion was obtained with addition of one additive in Watts nickel electroplating bath. Using the emulsion an even satin-finished nickel coating was prepared.
在瓦特镍镀液中加入添加剂后获得较稳定的悬浊液，利用这种镀液制得珠光效果良好的珍珠镍镀层。
6·The fused salts as solvents for preparing electroplating bath have some important features, that is, their wider temperature range of liquid state and larger "electrochemical window".
用熔盐作为制备金属电沉积槽液的溶剂具有液态温度范围广和“电化学窗口”大等优异特点。
7·The Pd-Ni electroplating bath types and characteristics are comprehensively introduced, the methods improved property of Pd Ni coating to adapt to electron industry are also presented.
综述了钯镍合金常见的镀液类型及其特点，介绍了一些改进和提高镀层质量以适应电子工业技术要求的措施。
8·Electroplating is an electrochemical process by which metal is deposited on a substrate by passing a current through the bath.
电镀是一种在电镀槽通上电流使金属沉 淀在基体上的电化学过程。
9·Nickeltungsten alloy coating was deposited on copper plate making use of electroplating in the bath composed of nickel sulfate, sodium tungstate, and trisodium citrate.
采用硫酸镍、钨酸钠和柠檬酸三钠为基本组分的镀液，通过电镀的方法在紫铜试片上沉积得到了镍钨合金镀层。
10·The insoluble and colloidal nickel hydroxide formed in electroplating is the main cause for the deterioration of bath and plating.
在电镀过程中所产生的不溶的、胶态状的氢氧化镍是造成镀液和镀层质量恶化的主要原因。